Catastrophic cascade of failures in interdependent hypergraphs.

The failures of individual agents can significantly impact the functionality of associated groups in interconnected systems. To reveal these impacts, we develop a threshold model to investigate cascading failures in double-layer hypergraphs with interlayer interdependence. We hypothesize that a hyperedge disintegrates when the proportion of failed nodes within it exceeds a threshold. Due to the interdependence between a node and its replica in the other layer, the disintegrations of these hyperedges could trigger a cascade of events, leading to an iterative collapse across these two layers. We find that double-layer hypergraphs undergo abrupt, discontinuous first-order phase transitions during systemic collapse regardless of the specific threshold value. Additionally, the connectivity measured by average cardinality and hyperdegree plays a crucial role in shaping system robustness. A higher average hyperdegree always strengthens system robustness. However, the relationship between system robustness and average cardinality exhibits non-monotonic behaviors. Specifically, both excessively small and large average cardinalities undermine system robustness. Furthermore, a higher threshold value can boost the system's robustness. In summary, our study provides valuable insights into cascading failure dynamics in double-layer hypergraphs and has practical implications for enhancing the robustness of complex interdependent systems across domains.

Research on the hydraulic support face guard mechanism and coupling characteristic of rib spalling in large mining heights.

In view of the problem of poor coupling adaptability and easy rib spalling of coal wall in large mining height comprehensive mining, based on the effective inhibition effect of face guard mechanism on coal wall spalling, the structural characteristics and bearing capacity of different structural forms of the face guard mechanism are compared and analyzed. According to the surrounding rock adaptability of the face guard mechanism, established a numerical analysis model for rigid-flexible coupling of the face guard mechanism under different spalling forms. In order to accurately simulate the stress state of the protective mechanism, a variable stiffness spring damping system is used to replace the hydraulic cylinder. The load-bearing performance and response characteristics of the face guard mechanism under rib spalling coupling conditions were analyzed by applying uniform normal load and impact load to the face guard. The findings indicated that, the integral-type face guard mechanism has a better effect on suppressing rib spalling. When the face guard mechanism bears the static load of the coal wall, the entire response process of the face guard jack can be divided into three stages: initial support, increasing resistance bearing, constant resistance bearing; both the impact load position and the coupling state of the rib spalling will affect the characteristics of force transmission at the face guard mechanism's hinge point, the hinge point between the extensible canopy and the primary face guard is most sensitive to biased load. The research results can provide reference for optimizing the face guard mechanism of large mining height hydraulic support and improving the reliability of coal wall support.

Stability analysis of loess fill slope supported by frame prestressed anchors considering tensile strength cut-off.

In the stability analysis of loess fill slope, the fissure nature of loess is often ignored, which makes the stability calculation of fill slope too conservative. Based on the upper limit theory of plastic limit analysis, the stability analysis model of loess-filled fissured slope supported by frame prestressed anchors was established. Considering the tensile strength cut-off yield property of soil, the stability coefficient of slope was calculated, and the influence of different factors on slope stability was analyzed. The results show that ignoring the fissures in loess will overestimate the stability of the fill slope, and the support structure can significantly improve the stability of the loess-filled fissure slope. The research results of this paper can further enrich the stability analysis theory of loess-filled fissured slope supported by frame prestressed anchors, which is of great significance to guide engineering practice.

SVep1, a temperate phage of human oral commensal Streptococcus vestibularis.

Introduction: Bacteriophages play a vital role in the human oral microbiome, yet their precise impact on bacterial physiology and microbial communities remains relatively understudied due to the limited isolation and characterization of oral phages. To address this gap, the current study aimed to isolate and characterize novel oral phages. Methods: To achieve this, oral bacteria were isolated using a culture-omics method from 30 samples collected from healthy individuals. These bacteria were then cultured in three different types of media under both aerobic and anaerobic conditions. The samples were subsequently subjected to full-length 16S rRNA gene sequencing for analysis. Subsequently, we performed the isolation of lytic and lysogenic phages targeting all these bacteria. Results: In the initial step, a total of 75 bacterial strains were successfully isolated, representing 30 species and 9 genera. Among these strains, Streptococcus was found to have the highest number of species. Using a full-length 16S rRNA gene similarity threshold of 98.65%, 14 potential novel bacterial species were identified. In the subsequent phase, a temperate phage, which specifically targets the human oral commensal bacterium S. vestibularis strain SVE8, was isolated. The genome of S. vestibularis SVE8 consists of a 1.96-megabase chromosome, along with a 43,492-base pair prophage designated as SVep1. Annotation of SVep1 revealed the presence of 62 open reading frames (ORFs), with the majority of them associated with phage functions. However, it is worth noting that no plaque formation was observed in S. vestibularis SVE8 following lytic induction using mitomycin C. Phage particles were successfully isolated from the supernatant of mitomycin C-treated cultures of S. vestibularis SVE8, and examination using transmission electron microscopy confirmed that SVep1 is a siphovirus. Notably, phylogenetic analysis suggested a common ancestral origin between phage SVep1 and the cos-type phages found in S. thermophilus. Discussion: The presence of SVep1 may confer immunity to S. vestibularis against infection by related phages and holds potential for being engineered as a genetic tool to regulate oral microbiome homeostasis and oral diseases.

Nitrogen addition enhances tree radial growth but weakens its recovery from drought impact in a temperate forest in northern China.

Forest growth in the majority of northern China is currently limited by drought and low nitrogen (N) availability. Drought events with increasing intensity have threatened multiple ecosystem services provided by forests. Whether N addition will have a detrimental or beneficial moderation effect on forest resistance and recovery to drought events was unclear. Here, our study focuses on Pinus tabulaeformis, which is the main plantation forest species in northern China. We investigated the role of climate change and N addition in driving multi-year tree growth with an 8-year soil nitrogen fertilization experiment and analyzing 184 tree ring series. A moderate drought event occurred during the experiment, providing an opportunity for us to explore the effects of drought and N addition on tree resistance and recovery. We found that N addition was beneficial for increasing the resistance of middle-aged trees, but had no effect on mature trees. The recovery of trees weakened significantly with increasing N addition, and the reduction in fine root biomass caused by multiyear N addition was a key influencing factor limiting recovery after moderate drought. Our study implies that the combined effect of increasing drought and N deposition might increase the risk of pine forest mortality in northern China.

Vibration response difference of caving mechanism under coal rock impact based on mechanical-hydraulic coupling.

Top coal caving in fully mechanized caving mining will cause an irregular impact on the caving mechanism of hydraulic support. The vibration response of the caving mechanism varies under different forms of impact. This response difference is a prerequisite for new coal rock identification technology in intelligent mining. Therefore, this work studies the difference in vibration response of the caving mechanism under different forms of impact. An innovative mechanical-hydraulic coupling system model of the caving mechanism impact by coal rock is established. The metal plate impact test proved the significant difference in vibration response of the caving mechanism under coal rock impact of different materials. Afterward, a more improved mechanical-hydraulic co-simulation model analyzed the difference in the vibration response of the caving mechanism under different rock materials, volumes, velocities and impact positions. The results show that the vibration response is more intense under rock impact than under coal impact. A lower position, a faster velocity and a larger volume correspond to a more noticeable response difference in the caving mechanism. The vibration and fault sensitive areas of the caving mechanism are determined. This study has a reference significance for improving the caving mechanism's structural design and failure prevention. The conclusions provide guidance for a new intelligent coal rock identification technology based on vibration signals.

Notable conservation gaps for biodiversity, ecosystem services and climate change adaptation on the Tibetan Plateau, China.

Incorporating biodiversity, ecosystem services (ESs) and climate change adaptation into the conservation targets of protected areas (PAs) is being acknowledged. Targeting conservation actions requires a thorough understanding of the relationship between PAs and these important regions. However, few studies have identified conservation gaps while simultaneously considering these three aspects. Here, we assessed the representativeness of the PAs network for biodiversity, ESs and climate refugia (as a proxy for climate change adaptation ability) on the Tibetan Plateau (TP). Our analysis showed that these priority conservation regions were primarily located in the south and southeast of the TP, while they were impacted by intense human pressure. Most ESs and all types of species richness showed a significant positive correlation. Additionally, a positive correlation between multiple climate refugia and different types of species richness was detected. Representativeness analysis revealed notable conservation gaps for these three aspects in existing PAs, highlighting the urgency of adjusting their distribution and improving their representativeness. By integrating these conservation targets, priority regions for future conservation were further delineated. Taken together, our findings contribute to improving the efficiency of PAs and optimizing conservation planning.

Impact Response of the Tail Beam Jack Based on Bidirectional Fluid-Structure Coupling Simulation.

In top coal caving mining, the coal rock collapse will cause an irregular impact on the tail beam jack of the caving control mechanism. The severe impact will lead to jack failure. The bidirectional fluid-structure coupling model is built on Fluent and Mechanical software to study the impact response of the tail beam jack. The dynamic flow velocity streamlines, hydraulic pressure distribution, stress field, and strain field of the jack under impact load are extracted. The response characteristics of the jack in the stationary state and motion state are analyzed. The conclusions are as follows: the stress and strain of the rodless cavity are much larger than those of the rod cavity, which is more likely to be damaged. The hydraulic pressure in the jack cavity is in vertical layered distribution. The flow velocity streamlines present spiral shapes. The response degree of the hydraulic pressure signal in the rodless cavity is stronger than that in the rod cavity, and the response degree of the flow velocity signal in the rod cavity is stronger than that in the rodless cavity. The impact response of the jack in the motion state is more sensitive and stronger than that in the stationary state. The coal rock collapse situation can be most effectively identified only by comprehensively analyzing the rodless cavity's pressure signal and the rod cavity's velocity signal. This paper innovatively visualizes the flow velocity streamlines and pressure distribution together. The bidirectional fluid-structure coupling method is innovatively applied to the tail beam jack. The findings of this study can help for better understanding of the tail beam jack's structural design and failure prevention. This study provides a certain research basis for the intelligent coal rock identification technology in mining coal based on jack vibration signals.

Searching for sliding surfaces in multi-level loess slopes based on the brachistochrone.

As a key problem in slope-stability analysis, searching for potential sliding surfaces has attracted the attention of experts and scholars for a long time. However, the commonly used sliding surface curves are only considered in terms of shape approximation and lack physical significance. The search process involved in stability analysis of multi-level slopes is complex and a large amount of calculation is required. In order to solve this problem, this paper proposes a new sliding surface form based on physical interpretation of the brachistochrone, and establishes a search model for the brachistochrone sliding surface of a multi-level loess slope. At the same time, in order to further expand the search range and find a more ideal potential sliding surface curve shape and position with a lower safety factor, we recommend continuing the sliding-surface search after the brachistochrone is improved. We compared the calculation results for the position of the potential sliding surface and the stability safety factor with the corresponding results for an arc sliding surface (in combination with a calculation example) to verify its rationality. The approach offered here not only provides a new choice of sliding surface curve form for slope-stability analysis, but also significantly improves search efficiency for potential sliding surfaces of multi-level loess slopes.

Evaluation of the Protection Effectiveness of Natural Protected Areas on the Qinghai-Tibet Plateau Based on Ecosystem Services.

Evaluating the protection effectiveness of natural protected areas is an important step in successful management. Adopting 330 natural protected areas on the Qinghai-Tibet Plateau as research subjects, the regional dominant ecosystem service function was selected, and various temporal and spatial analysis methods were employed to analyze the evolution characteristics and influencing factors of ecosystem service patterns from 2000 to 2020. Our results indicated that (1) the water conservation function stabilized after fluctuation and decline, the soil conservation function fluctuated upward, and the windbreak and sand fixation function exhibited an increase after a decreasing fluctuation. (2) The protection effectiveness of25 protected areas significantly improved, that of 151 protected areas improved, that of 84 protected areas stabilized, that of 56 protected areas worsened, and that of 14 protected areas significantly worsened. (3) The top three influencing factors in descending order were precipitation change > altitude > mining area density. (4) Remarkable protection results were achieved in national protected areas, established management institutions, earlier established areas (before 2000), and areas exhibiting alow built-up area density (<0.75%) and low mining density (<1%). Our study provides technical support for the construction and management of protected areas and improvement in ecosystem service functions on the Qinghai-Tibet Plateau.

Helical Synthetic Nanographenes with Atomic Precision.

ConspectusUnderstanding and harnessing the properties of nanoscale molecular entities are considered as new frontiers in basic chemistry. In this regard, synthetic nanographene with atomic precision has attracted much attention recently. For instance, taking advantage of the marvelous bonding capability of carbon, flat, curved, ribbon-type, or cone-shaped nanographenes have been prepared in highly controllable and elegant manner, allowing one to explore fascinating molecular architectures with intriguing optical, electrochemical, and magnetic characteristics. This stands in stark contrast to other carbon-rich nanomaterials, such as graphite oxides or carbon quantum dots, which preclude thorough investigations because of complicate structural defects. Undoubtedly, synthetic nanographene contributes strongly to modern aromatic chemistry and represents a vibrant field that may deliver transforming functional materials crucial for optoelectronics, nanotechnologies, and biomedicine.Nonetheless, in many cases, synthesis and characterization of nanographene compounds are highly demanding. Low solubility, high molecular strain, undesired selectivity, as well as incomplete or excessive C-C bond formation are common impediments, that require formidable efforts to control the molecular geometry, to modulate the edge structure, to achieve accurate doping, or to push the upper size boundary. These endeavors are indispensable for establishing structure-property relationships, and lay down foundation for exploring synthetic nanographenes at a high level of sophistications.In this Account, we summarize our contributions to this field by presenting a series of helical synthetic nanographenes, such as hexapole [7]helicene (H7H), nitrogen-doped H7H, hexapole [9]helicene (H9H), superhelicene, and supertwistacene. This kind of giant synthetic nanographene reaches the size domain of carbon quantum dots, albeit has precise atomic structure. It provides a unique platform to study aromatic chemistry and chirality at the nanoscale. We discuss synthetic methods and point out, in particular, the strengths and pitfalls of Scholl oxidation, which are expected to be valuable for making synthetic nanographenes in general. In addition, we illustrate their exciting electrochemical and photophysical performance, which include, but are not limited to, reversible multielectron redox chemistry, record high panchromatic absorption, impressive photothermal behavior, and extremely strong Cotton effect. These unusual characteristics are convincingly traced back to their three-dimensional conjugated architectures, highlighting the critical roles of π-electron delocalization, heteroatom-doping, substitution, and molecular symmetry in determining nanographenes' properties and functions. Lastly, we put forward our understanding on the challenges and opportunities that lies ahead and hope this Account will inspire ever more ambitious achievements from this attractive area of research.

Calculation of horizontal displacement of loess fill slope supported by frame prestressed anchors based on minimum potential energy method.

Combined with the deformation characteristics of flexible retaining structure, the horizontal displacement calculation method of loess fill slope supported by frame prestressed anchors is proposed. Based on the minimum potential energy method, the analytical solution of horizontal displacement of slope under self-weight and additional load is derived, and the influence of soil parameters and supporting structure parameters on displacement is analyzed. The proposed calculation method is applied to a practical engineering and compared with the numerical simulation, which shows that the method is reasonable and reliable. The minimum potential energy method is clear in concept and simple in solving the horizontal displacement of loess fill slope supported by frame prestressed anchors. The calculation method proposed in this paper can be applied to the structural optimization design of loess fill slope supported by frame prestressed anchors, and further enrich the displacement calculation theory of slope supported by flexible retaining structure.

Bacteriophage-Resistant Mutant of Enterococcus faecalis Is Impaired in Biofilm Formation.

Enterococcus faecalis is a common gram-positive non-spore-forming bacterium in nature and is found in the upper respiratory tract, intestine, and mouth of healthy people. E. faecalis is also one of the common pathogens causing nosocomial infections and is resistant to several antibiotics commonly used in practice. Thus, treating drug-resistant E. faecalis with antibiotics is challenging, and new approaches are needed. In this study, we isolated a bacteriophage named EFap02 that targets E. faecalis strain EFa02 from sewage at Southwest Hospital. Phage EFap02 belongs to the Siphoviridae family with a long tail of approximately 210 nm, and EFap02 can tolerate a strong acid and alkali environment and high temperature. Its receptor was identified as the capsular polysaccharide. Phage-resistant mutants had loss-of-function mutations in glycosyltransferase (gtr2), which is responsible for capsular polysaccharide biosynthesis, and this caused the loss of capsular polysaccharide and interruption of phage adsorption. Although phage-resistant mutants against EFap02 can be selected, such mutants are impaired in biofilm formation due to the loss of capsular polysaccharide, which compromises its virulence. Therefore, this study provided a detailed description of the E. faecalis EFap02 phage with the potential for treating E. faecalis infection.

Analysis of force and displacement of anchor systems under the non-limit active state.

This paper proposes a concept of soil shear strength exertion around an anchorage section to analyze and calculate the anchor's force and displacement. First, based on the Mohr stress circle, the numerical relationship between the value of the internal friction angle exertion, the value of the cohesion exertion, and the displacement are established under the non-limit active state. According to the interaction mechanism between the anchorage section and the surrounding soil, this paper obtains the corresponding relationship between the value of the soil's shear strength exertion and displacement under the non-limit active state. Then, according to the load transfer principle of the anchorage section, the basic differential equation is established. The differential equation of the relative displacement distribution along the length of the anchorage section under the non-limit active state is further derived. And the calculation and analysis formula of the shear stress and relative displacement in the anchorage section considering the process of the soil shear strength exertion is also obtained. Finally, this paper compares the calculation method with the hyperbolic model calculation method for the same example. The results verify the accuracy of the calculation method.

Diagnosis and treatment of chylous leakage after modified radical mastectomy for breast cancer: a case report.

The post-operative complication of chylous leakage after breast cancer is relatively rare, and few clinical studies have been published. We report a 64-year-old woman with chylous leakage following modified radical mastectomy. We describe the patient's diagnostic and treatment process in detail. The patient was diagnosed with grade II (left) breast invasive ductal carcinoma. Post-operatively, the patient's chest wall and axilla were pressurized, and negative pressure drainage was initiated. On the fifth post-operative day, the drainage from the chest wall and axilla increased significantly, and the patient developed chylous leakage on the eighth postoperative day. We injected meglumine diatrizoate (100 mL) and elemene (10 mL) into the patient's axilla, and the chylous leakage gradually resolved 18 days post-operatively. In this report, we focus on managing a case of chylous leakage after modified radical mastectomy for breast cancer. Meglumine diatrizoate combined with elemene is a possible treatment for the management of this rare complication.

Optimizing livestock carrying capacity for wild ungulate-livestock coexistence in a Qinghai-Tibet Plateau grassland.

Wild ungulates are an important part of terrestrial ecosystems and play a critical role in maintaining ecosystem health and integrity. In many grassland ecosystems that are habituated by wild ungulates, the coexistence of domestic ungulates has created a conflict over grazing resources. Solving this conflict requires a balanced and sustainable policy that satisfies both the needs of wildlife protection and food production. Here, we assess the optimal grassland livestock carrying capacity of an alpine grassland on the Qinghai-Tibet Plateau, given the coexistence of wild populations of kiangs (Equus kiang) and Tibetan gazelles (Procapra picticaudata), two key species grazing in this region. We use kriging and the MaxEnt method to estimate the population sizes of kiangs and Tibetan gazelles in Maduo County, Qinghai Province. We then convert the estimated population size of the two species into sheep units and calculate the residual carrying capacity for livestock grazing. We show that after accounting for the grazing need for kiangs and Tibetan gazelles, grassland in Maduo is capable of supporting 420,641 sheep units, which is slightly more than the current livestock population. However, the residual carrying capacity is highly uneven across the region, and overgrazing is found in many areas of Maduo, especially in northern Maduo. This research provides a useful framework for planning sustainable livestock farming for the Qinghai-Tibet Plateau and other regions facing wildlife-livestock conflict.

Double π-Extended Undecabenzo[7]helicene.

This work reports the first double π-extended undecabenzo[7]helicene 1, which is a large chiral nanographene, composed of 65 fused rings and 186 conjugated carbon atoms. The molecular identity of 1 has been confirmed by single crystal X-ray diffraction. A wine coloured solution of 1 in dichloromethane absorbs light from ultraviolet to the near infrared, featuring an extremely large molar absorption coefficient of 844 000 M-1 cm-1 at 573 nm. Optically pure 1 shows a record high electronic circular dichroism intensity in the visible spectral range (|Δϵ|=1375 M-1 cm-1 at 430 nm) known for any discrete polycyclic aromatic hydrocarbon. These unusual photophysical properties of 1 contrast sharply with those of a mono-undecabenzo[7]helicene derivative 2.

Supertwistacene: A Helical Graphene Nanoribbon.

This work describes a synthetic chiral graphene nanoribbon, named supertwistacene 1. It has four superbenzene (HBC) units linearly fused in a helical manner. The structure of 1, 4.3 nm in length, with an end-to-end twist of 117°, was confirmed by single-crystal X-ray diffraction. In contrast to various twistacene compounds and their analogues, 1 has a very stable configuration. It resists thermal isomerization even when being heated at 200 °C for 16 h. Enantiopure 1 obtained by chiral HPLC shows distinct CD signals in a broad spectral range until 600 nm. In addition, two smaller congeners of 1, the trimer 2 and the dimer 3, were also prepared and systematically investigated. Combining theoretical and experimental studies on 1-3 presents a big picture on their (chir)optical and electronic characteristics.

Design of Dendritic Large-Pore Mesoporous Silica Nanoparticles with Controlled Structure and Formation Mechanism in Dual-Templating Strategy.

Dendritic large-pore mesoporous silica nanoparticles (DLMSN) is an important biodegradable drug carrier due to its high porosity, which can be prepared by coassembly of a major template and an auxiliary template in aqueous solution, followed by hydrolysis of tetraethyl orthosilicate (TEOS). The auxiliary template is key to obtaining dendritic large-pore structures; however, how to choose the auxiliary template to obtain the desired pore structure is largely unknown. This is because the formation mechanism of DLMSN is still not clear. In this study, a series of therapeutic agent molecules were used as the auxiliary templates to study the control of the pore morphology of DLMSN. Transmission electron microscopy observation and theoretical modeling were used to study the micelle formation, and early stage silica formation was also observed. It is proposed that the silica branches and sheets formed by hydrolysis of TEOS on single micelle and micelle bundles, which formed the initial nanoparticles with spherical structures and new silica species growing on the early formed particles to form DLMSN. The fine control of pore morphology was demonstrated by using auxiliary templates with different structural characteristics, which were used for selective drug loading. This work provides a design strategy of how to choose suitable auxiliary templates for preparing DLMSN with desired pore structure for biomedical applications.

A Nitrogen-Doped Hexapole [7]Helicene versus Its All-Carbon Analogue.

Two synthetic nanographenes (NGs), N-H7H and C-H7H, were prepared. N-H7H is doped with nitrogen, and C-H7H is the all-carbon analogue. Both are hexapole [7]helicenes (H7Hs), and their structures were identified by single-crystal X-ray diffraction. Sharp contrasts in absorption (abs λmax , 683 vs. 593 nm), emission (em λmax , 894 vs. 777 nm), and electrochemical behavior (ox E1 , 0.28 vs. 0.53 V) were observed between N-H7H and C-H7H, and the origin of these differences was rationalized by theoretical calculations. Studies on N-H7H and C-H7H set a clear example to elucidate the remarkable effects of N-doping on the physical properties of NGs.